7
purchased the treatment table at. Original spare parts should be used
only.
10. When the power cable and / or the plug are damaged, it must be
replaced by the manufacturer or an authorized aftersales service or
a qualified professional only. Never try to repair or replace the power
cable and / or the plug yourself. RISK OF ELECTRIC SHOCK!
11.
Always
unplug the SPL med if it is not used for a longer period of
time.
12. Always disconnect the SPL med from the mains before cleaning and
/ or maintenance. RIKS OF ELECTRIC SHOCK!
13.
Never
pull the power supply cable to unplug the SPL med. Always
use the power plug itself to unplug the treatment table. RISK OF
ELECTRIC SHOCK!
14.
Never
touch power plugs, power switches or other electrical
components with wet or damp hands. RISK OF ELECTRIC SHOCK!
15. Do not place or store the SPL med close to a bath, a shower or a
washbasin. There is danger that the SPL med may come into contact
with splashed water. RISK OF ELECTRIC SHOCK!
WARNING!
To reduce the risk of burns, electrocution, fire or injury to persons:
1. Use a properly-grounded socket with proper voltage (230 V AC) only.
2.
The electric components must not come in contact with water.
RISK OF ELECTRIC SHOCK!
3. Check all cables regularly and contact our Customer Service
Department when any cable is in improper condition. RISK OF
ELECTRIC SHOCK!
4. The SPL med must not stand on the power cord. Ensure that the cord
is not damaged when moving the treatment table. Do not step on the
cord. Do not stretch the cord.
5. Always ensure that the power cord is not bent or squeezed during
installation.
6.
Do not
use any extension cords, multiple sockets or adapters. RISK
OF FIRE!
7.
Do not
open the housings of the electric control panels! RISK OF
ELECTRIC SHOCK!
8. Liquids
must not
get into the electric control panels! RISK OF
ELECTRIC SHOCK!
9. Do not use water or any other liquids while carrying out any
application. Do not spill water or any other liquids over, on or into the
SPL med. Should you spill any water,
immediately
pull the mains
plug and dry the SPL med thoroughly. RISK OF ELECTRIC SHOCK!