12
5.2 Unpacking
WARNING!
While unpacking, the packaging materials (polythene
bags, polystyrene pieces, etc.) should be kept away from children and
pets. CHOKING HAZARD! RISK OF INJURY!
P
LEASE OBSERVE THE FOLLOWING INSTRUCTIONS WHEN THE
SPL
MED IS
DELIVERED IN A CARDBOARD
:
➢
Open the top of the packaging carefully. Do not use any sharp-edged items which
can damage the upholstery.
➢
Do not
lift the SPL med
but
remove the top packaging first. Then you can lift
and remove the outer packaging.
➢
The headrest is in the same cardboard. The headrest has to be installed (see
chapter 9.4.1 H
EADREST
).
➢
Carry the SPL med using its base / supporting structure
only
. Remove the
transport protection (2 safety straps / if equipped) before initial operation.
6. Transport, space requirement and assembly
6.1 Transport
❖
Carry the SPL med by its base / supporting structure during transport
only
.
❖
Never
carry the SPL med by its lying / sitting surface or its armrests during
transport; otherwise you can damage the SPL med seriously.
A transport of the SPL med can be severely affected to some extent due to
unfavourable environment conditions. Such unfavourable environmental
conditions are e.g. narrow doors, narrow corners behind doors, narrow corridors,
narrow staircases, spiral staircases etc. The weight of the SPL med is at least 83
kg (without options). Please note that the manoeuvrability of the SPL med is thus
limited.
6.2 Space requirement
❖
Before installation, ensure that there is sufficient free space for the SPL med
relevant to its total length.
➢
Min. free space
required for the SPL med: Length = min. 203.00 cm * Width =
min. 80.00 cm
