13
1.
Cut the packaging tapes (
A
) with scissors and remove them.
2.
Do not open
the upper cardboard (
B
)
but
lift it carefully and vertically as a whole
from the MLE and from the special pallet (
C
). For this purpose, you will need
two persons (one person each on the short sides /
D
of the cardboard).
3.
Dispose of the cardboard properly.
4.
Now you can move the MLE from the special pallet;
strictly observe
the
instructions given in chapter 6.2 T
RANSPORT
/
SPECIAL CARRYING AIDS
and
chapter 6.2.1 U
SE OF THE SPECIAL CARRYING AIDS
when doing so.
6. Assembly and transport of the MLE
6.1 Assembly
The MLE is usually delivered fully assembled, so no assembly work is necessary. In
exceptional cases
, necessary assembly work will be carried out by the deliverer on
site.
Before installation, ensure that there is sufficient free space for the MLE relevant
to its total length.
WARNING!
The cables of the models with Smart Thermo are between
the upholstery and metal rack (depending on model).
Removing of the
upholstery must be carried out by authorized professionals only!
6.2 Transport
A transport of the MLE can be severely affected to some extent due to
unfavourable environment conditions. Such unfavourable environmental
conditions are e.g. narrow doors, narrow corners behind doors, narrow corridors,
narrow staircases, spiral staircases etc. The weight of the MLE is at least 130 kg;
the length is approx. 204 cm and the width including the upholstery is approx. 84
cm; thus, the manoeuvrability of the MLE is limited.
E
XTENDABLE
/
RETRACTABLE CASTORS
:
The MLE is equipped with extendable / retractable castors. The castors can be
extended to change the site of the MLE (s. chapter 6.2.2 E
XTENDABLE
/
RETRACTABLE CASTORS
).
