TABLES
2
OPERATING MANUAL
betriebshandbuch
TABLE OF CONTENTS
1. Purpose
3
2. General Information
3
3. Technical description
3
3.1. Technical data
3
3.2. Standard version
4
3.3. Optional accessories
4
3.4. Documents
4
4. Operation
4
4.1. Cooling system
4
4.1.1. Compressor
4
4.2. Wiring system and power supply
4
4.3. Installation and usage
5
4.4. Transport
5
5. Maintenance
6
6. Safety considerations and workplace hygiene
6
TABLES AND DIAGRAMS
Table 1.1
KUJ
3
Diagram 1.
Control Panel
5
Diagram 2.
Electrical Circuit Schematic
6
The warranty does not cover damage to glass and elements which naturally get used up: fluorescent lamps, starters, etc…
The manufacturer guarantees proper functioning of the device in Class III climate conditions, that is an ambient temperature
not exc250 C and relative humidity up to 60%. Frosting or misting of windows is a natural process resulting from
temperature differences when relative humidity exceeds 60%. Calling a technician in such a case would be of no use.
It is very important that this device operate on a level surface. Operating this device on a slanted surface is not permitted - this
might make condensation difficult and lead to a malfunction.
The device’s compressor is designed to operate with a voltage of no less than 210 V and no more than 240 V. Using this device
beyond these power parameters may lead to irreversible damage to the device.
If the condenser needs to be cleaned, and it should be at least once every two months, use a soft brush and brush along the
ribs in order to remove dust and other residue.
The manufacturer does not bear responsibility for damage to the device resulting from an uncleaned condenser.
If the permanently-fixed power cord becomes damaged, then it must be replaced through the manufacturer, at a specialized
repair facility, or by a qualified technician in order to prevent injury.
Do not block the condenser’s fan vents.
Protect the cooling circuitry from any damage.
Do not use any electrical devices inside the cooling chamber.
The confectionery display cabinet should be set up so that the power plug is easily accessible.
CAUTION
The device must be carefully positioned on a level surface before it is turned on.
