background image

IMPORTANT - READ CAREFULLY - RETAIN THESE INSTRUCTIONS FOR

    FUTURE REFERENCE.

 INFORMATION

This product is intended for a maximum person’s weight of 130kg per side. Do not exceed this weight. 

Due to the size of this product we recommend that it is assembled in the room intended for use. 
When you are ready to start, make sure that you have the right tools, plenty of space and a clean, dry area for assembly.  

Unwrap all packaging materials and place the components on top of the carton box or on a clean floor to prevent it from  

scratching.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled and secured as illustrated before use.

This product should only be used on firm, level ground.
Dismantle for transportation.

Only use recommended accessories.

WARNINGS

Check all screws or bolts are tightened and inspect regularly.

DO make sure the legs remain in contact with the ground.

DO keep small parts out of reach of children.
DO NOT use power tools to construct this product.

DO NOT over tighten screws or bolts.

DO NOT use this product if parts are missing, damaged or worn. 
DO NOT stand on the product.

DO NOT tighten screws until fully assembled.

Page 2 of 19

  Batch No. :V2 -08/19

This product complies with the essential requirements of the EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC  

Tools not included.

DO NOT insert foreign objects into the product or attempt to repair this unit by yourself.

DO NOT place the product in direct sunlight, open flames such as candles or heat, such as radiators. Keep away from 

temperatures over 35°C.

Unplug the unit during lightning storms or when unused for long periods of time.

ELECTRICAL COMPONENTS

DO NOT place any objects filled with liquids, such as vases, on the product. 

In order to prevent injury, never attempt to remove the cover or any other components.

DO NOT expose this product to dripping or splashing, rain or areas with heavy moisture.

The unit should be powered off before plugging the product into the power outlet. This unit should be powered off before

 unplugging the product. Install this unit so that the power cord can be unplugged from the socket immediately if any  

problems occur.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, 

 or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use  of the  

appliance by a person responsible for their safety. 
Take care when adjusting positions to avoid trapping or pinching of body parts
Power cord – This item is only to be plugged into an AC 110V ~ 240V power outlet.  

NEWARK TV BED ASSEMBLY INSTRUCTIONS

Children (under the age of 13) should be supervised to ensure that they do not play with the appliance
Pay particular attention when children or animals are present to ensure that no accidental entrapment occurs whilst operating  
this product.
Incorrect installation could lead to injury, take care following instructions.

Never use scourers, abrasives or chemical cleaners

CARE INFORMATION

To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or detergents as they can bleach or  

damage the product

Содержание NEWARK TV BED




















Отзывы: