STEP 7 Connecting The Power
Page 13 of 19
Batch No. :V2 -08/19
NEWARK TV BED ASSEMBLY INSTRUCTIONS
Connect the TV lift up Power cord from the control boxand to the main
supply (extention lead might be needed) .
Up/Down Button
TV Lift Up
Power cord
Extension lead
WARNING
Plug the TV power cable into the socket at the bottom of footboard
Connect the cables to the television & media equipment making
sure the cables are not loose. If necessary use cable ties & cable
When TV is lowered power for TV turns off automatically.
The mains supply must be fully earthed and be easy to reach if you
need to diconnect the power.
When TV is raised, power turns back on automatically
AC 220-240V
Lift Buttons
HDMI
Aerial
WARNING
HAZARDOUS VOLTAGE.
Contact may cause
electric shock or burn.
This unit is to be serviced by
trained personnel only.
Power Lead
then connect your own media cables as required.
clips to route cable safely.