Page 17 of 19
Batch No. :V2 -08/19
NEWARK TV BED ASSEMBLY INSTRUCTIONS
It is important that after the initial fitting of your TV, all cables including aerial HDMI, TV power and any auxiliary
the back of the TV leading the cables down the duct on left or right side as appropriate.
We cannot be held responsible for any damage to cabling due to poor cable management and therefore cables getting
trapped because they are not installed correctly.
After you have finished the installation, there should be no loose cables at all. Push any excess cables carefully back
down the relevant duct.
IMPORTANT Never try to repair this product yourself, take it to an authorised technician. Trying to remove panels or
any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen onto the unit,
the unit has been exposed to rain or moisture or does not operate normally.
repairing the unit yourself could result in an electric shock. Servicing is required when the unit has been damaged in
provided.
The cable clips and cable ties are provided for your safety and the safety of the equipment. These are to prevent any
entrapment of cables during the operating of the TV lift when it is moving in either the up or down mode.
Route the cables in straight lines where possible. Tie the cables together then fit a self-adhesive cable clip close to
The TV will automatically turn off when it lowers into the footboard, then on again when it rises up.
cables that you fit yourself, are securely positioned close to the back of the TV using the cable clips and cable ties
