Gfp FT60
March 2019
4
•
Ensure that the voltages of the power supply you are using match the rated working voltages
before operation. Do not use incorrect power supply.
•
Do not use damaged wires or sockets. If abnormal conditions occur, switch off the power
supply first.
•
Only a licensed electrician should install wiring and outlet for the finishing table.
•
Do not defeat or remove electrical and mechanical safety equipment such as panels.
4.
General Safeguards
•
Do not use the machines for purposes other than feeding rigid substrates into your
laminator/printer and trimming finished products.
•
Keep out of reach of children.
•
Keep flammable and wet objects away from the unit.
•
Do not use flammable sprays or materials when cleaning the unit
•
Shut down the power and unplug the power cord before moving the machine
•
Note the locations of foot wheels while moving or operating this machine to avoid injuries
to your feet.
•
Disconnect from the power supply before repairs, maintenance or moving to a new
location.
•
Disconnect from the power supply when the machine is not in use for a long time
.
•
Perform only the routine maintenance procedures referred to in these instructions.
