Gfp FT60
March 2019
10
9B. Attaching the legs to the table
1.
Using 2 people, lift the table off the skid and stand it on its top
2.
Attach a leg to one side by sliding it between the base and the upright
3.
Insert a large bolt (12x110mm) into the hole on the top and tighten
4.
Note the locator tab position.
5.
Secure one corner support to the leg and upright by sliding the bolt head into the slot
on the base. NOTE: “Slot in the end of the bolt indicates the direction of the bolt
head”
6.
Insert bolt into the slot on the corner support and the leg; tighten with the wrench
7.
Repeat this process on the back with a corner support then do the same thing on the
other side of the table
Leg with castors
12x110mm bolt and
Allen wrench
Bottom cross member
Locator tabs
Supplied wrench
