Gfp FT60
March 2019
12
9E. Lighting the cutting surface
1.
Plug the power cord to turn on the lighted cutting mat side
9F. Adjusting the leveling pads
1. To raise and lower the leveling pads, spin the red dial toward you to lower
them and away from you to raise them.
10. Operation
10A. Rotating the table
To rotate the table, step on the lock release pedal at the bottom of the control panel leg; this
will retract the locking pad. Next push down on the handle with one hand and with the
other hand, push the table in the direction of the DOWN decal. Repeat to rotate to the
opposite side.
To lock the table in the vertical position, push the handle with one hand and the table with
the other hand. When the table has reached the vertical position, raise the locking block
with your foot by stepping on the pedal.
Fuse
Power Cord
