Gfp 865DH
February 2018
17
12. Additional Installation Items
1.
Check drive chains for tightness
2.
Check all drive set screws for tightness
3.
Check all electrical connections and input power and test for proper operation
13. Removing Print Hold Down Assembly
1.
For Roll to Roll applications and mounting, it may be necessary to remove the print
hold down assembly
2.
Unscrew knurled thumb screws securing the Print hold down assembly
3.
Lift off and remove assembly
14. Inserting Rewind Shafts
1.
Slide a cardboard core onto the rewind shaft
2.
Rotate the locking outer sleeves on both sides of the machine to the open position
3.
Align the arrow and shaft tongue with the slot in support bracket on one side
4.
Do the same for the opposite side support bracket
5.
Rotate both locking outer sleeves to the closed position on the support brackets