23
Base Message Waiting LED
You can turn off the Message Waiting LED by following the procedures:
1.
Press the
PROG/OK
key once and then press the
▼
key once to select
Setup BS.
> Setup BS
Date/Time
2.
Press the
PROG/OK
key once to select
Setup BS
.
3.
Press the
▼
key four times and the
PROG/OK
key once to select VMWI.
VMWI off ?
4.
Press the
PROG/OK
key to confirm.
Resetting the Base
You can reset the base through the following procedures:
1.
Press the
PROG/OK
key once and then press the
▼
key once to
Setup BS.
> Setup BS
Date/Time
2.
Press the
PROG/OK
key once to select
Setup BS
.
3.
Press the
▼
key five times and the
PROG/OK
key once to select Reset.
Enter PIN
4.
Enter the PIN Code and Press the
PROG/OK
key.
5.
Press the
PROG/OK
key to confirm, wait several seconds for the Base to Reset and “Saved” is shown when
completed.
Default Base Setting
Item Selection
Preset Remark
Dial mode
Tone or Pulse
Tone
Calls log record
Maximum 20 digits with
Date/Time each record
Empty
Flash time
100,120,270,300,370,600,800ms 600ms
Pin code
Any 4 digits
0000
Time
12:00a to 11:59p
12.01p
Date
Any valid date within year
2000 to 2099
Year:2006
Month:1
Date:1
CID prefix
On/Off
Off
Date / Time
You can set the Date/Time displayed in idle mode.
1.
Press the
PROG/OK
key .
2.
Press
▲
or
▼
key to select “Date/Time” then press the
PROG/OK
key, the LCD will display “Year 20xx”.
3.
Input the correct last two digits of year (range: 00-99) using number key, press
PROG/OK
key to confirm the
setting and enter month and date setting.
4.
Input the correct month and date, the format is: month/date (month range: 01-12, date range: 01-30/31) using
number key, press
PROG/OK
key to confirm the setting and enter time setting.
5.
Input the correct time, the format is: hour/minute using number key, press
▲
or
▼
key to select “AM” or
“PM”.
6.
Press
PROG/OK
key to confirm the setting.
