gfm C200-1, Руководство пользователя

Страница: 22 / 31

22
Base PIN Code
The Base settings and information can be reset by resetting the base unit. However, to avoid un-authorized
resetting of the Base, a PIN Code is needed in order to Reset.
1.
Press the
PROG/OK
key once and then press the ▼ key once to
Setup BS.
> Setup BS
Date/Time
2.
Press the
PROG/OK
twice to select Change PIN.
Enter PIN
3.
Enter the EXISTING PIN Code, the default PIN code is 0000 and Press the
PROG/OK
key.
**--
4.
Enter the NEW PIN Code and Press the
PROG/OK
key.
New PIN
5.
Repeat the NEW PIN Code and Press the
PROG /OK
key.
Repeat PIN
Note
:
Please record the PIN code as there is no way to find it within the system if you forget it.
Base Dial Mode
Depending on your Telephone network, you can select different Dialing modes:
1. Press the
PROG/OK
key once and then press the ▼ key once to select
Setup BS
.
> Setup BS
Date/Time
2.
Press the
PROG/OK
key once to select
Setup BS
.
3. Press the ▼ key once and then the
PROG/OK
key once to select Dial Mode.
4. The current Dial Mode is shown with an arrow. Use the ▲ or ▼ key to select
Tone
or
Pulse
dialing.
5. Press the
PROG/OK
key to confirm the setting. The phone will return to the previous menu.
Base Flash Time
Depending on your Telephone network, you can select different Flash timing:
1.
Press the
PROG/OK
once and then press the ▼ key once to
Setup BS.
> Setup BS
Date/Time
2.
Press the
PROG/OK
key once to select
Setup BS
.
3. Press the ▼ key twice and then the
PROG/OK
key once to select Flash Time.
4. The current Flash Time is shown with an arrow. Use the ▲ or ▼ key to select
100ms, 120ms, 270ms, 300ms,
370ms, 600ms
or
800ms
.
5. Press the
PROG/OK
key to confirm the settings. The phone will return to the previous menu.
Base CID Prefix
You can set to add a prefix digit “1” to Call log by following procedures;
1.
Press the
PROG/OK
key once and then press the ▼ key once to
Setup BS.
> Setup BS
Date/Time
2.
Press the
PROG/OK
key once to select Setup BS.
3. Press the ▼ key three times and then the
PROG/OK
key once to select Caller ID prefix.
4. The current Caller ID prefix is shown with an arrow. Use the ▲ or ▼ key to select On or Off.
5. Press the
PROG/OK
to confirm the setting. The phone will return to the previous menu.