GFE DWLR-01, Техническое руководство

Страница: 9 / 12

9.
Fasten the cable or suspension system to the well head using tie wraps or a weatherproof strain-relief system. If the
vent tube is incorporated in the cable, make sure not to pinch the cable too tightly or the vent tube may be
obstructed.
10.
Make a permanent mark on the cable at the hanging point so that future slippage, if any, can be determined.
Precautions
•
Handle the Sensor head with care, it may get damaged on strong impact with hard surface or ground.
•
Use 1A 12 Volts DC adapter to power the instrument, or the one which came along.
•
Wind up the extra cable to prevent wear and tear. It may hamper with the sensor’s reading.