Operating and maintenance instructions
EN
Cod. man A3200
Rev. 1/2007
Page 5 of 7
THIS MANUAL IS THE PROPERTY OF
UNDER NO CIRCUMSTANCES MAY IT BE DUPLICATED, EVEN PARTIALLY
STOP MODES AND EMERGENCY STOP
It is possible to obtain the normal stop function of machine by bringing master switch onto
position “0” (zero).
The general emergency stop function may be obtained by disconnecting the feed cable from
outlet.
After an emergency stop or stoppage due to an anomaly or lack of electricity, always put
master switch onto position “0” (zero).
WORK EXAMPLES
x
Start the machine
x
Hold the lens to be read, also already mounted on the
frame, between the contrast background and the machine
lens.
x
Bring near or faraway the lens to be checked from the
contrast background so that the initials are in focus
x
Slacken the knob positioned on the back side of the unit, in
order to regulate the angle of the machine, and extract
the foot according to needs, then tighten the knob for
blocking the foot in the desired position; this operation
gives the possibility to optimize the reading position.
MAINTENANCE
Any modification causing an effect on operation or safety of machine, may only be carried out
by manufacturer’s technicians or by technicians formally authorized by same. On the
contrary, GFC declines any responsibility for changes or damages which may subsequently
occur.
GFC declines any responsibility for improper use of machine, for damages caused by
operations not treated in this manual or which are unreasonable.
All ordinary and extraordinary maintenance operations are to be carried out with
machine off, isolating same from power by disconnecting feed cable.
EXTRAORDINARY MAINTENANCE
Extraordinary maintenance is intended that carried out when machine stops due to break-
down of mechanical or electrical parts.
For safety reasons final user is not permitted to carry out extraordinary maintenance
operations. Contact GFC or authorized Service Centre.
Содержание PUPILLO A3200
Страница 28: ......
