GFC PUPILLO A3200, Инструкция по эксплуатации и техническому обслуживанию

Страница: 9 / 28

Operating and maintenance instructions EN
Cod. man A3200 Rev. 1/2007 Page 4 of 7
THIS MANUAL IS THE PROPERTY OF UNDER NO CIRCUMSTANCES MAY IT BE DUPLICATED, EVEN PARTIALLY
PACKING
Packing contains the following:
x
Body of instrument
x
Power lead
x
Instruction, Use and Maintenance Manual
The machine has been designed to be moved by hand, without the necessity of additional
lifting devices.
Throughout the period when packed machine remains inactive, awaiting to be put into
operation, it is opportune to position it in a place safe from atmospheric agents.
UNPACKING
Once packaging has been removed no damage must be evident. On the contrary, Service
Centre must be informed.
Disposal of packaging material will be carried out by customer in compliance with the
regulations in force in the country where the machine is used.
PRE-ARRANGEMENT TO BE CARRIED OUT BY CUSTOMER
The user installs machine in suitable rooms, equipped with electrical system in compliance
with regulations in force.
Installation must be carried out in well-ventilated environments, dry and illuminated in
compliance with current legislation.
INSTRUCTIONS FOR USER
CONNECTION AND START-UP
Before carrying out connection, assure that mains voltage corresponds to that on
machine plate and that master switch is on “0” (zero) position.
Position the instrument on a perfectly horizontal surface so as to guarantee an adequate
stability; after having assured that the master switch is on “0” (zero) position, connect feed
cable as per the circuit diagram inserting same first in machine side and subsequently into
outlet.
START-UP
Start-up of machine is carried out by a voluntary action on master switch and is evidenced by
the warning light on the front of the machine.