52
Maintenance cycle counter
Parameter "8.5":
A maintenance cycle can be set between "0" and "99,000" cycles, the adjustment is made in
steps of one thousand.
The maintenance cycle counter reduces by one each time the Open limit position is reached.
When the cycle counter reaches zero the settings in Parameter “8.6” are activated.
Short-circuit/overload display
If there is a short-circuit or an overload of the 24 V DC supply voltage, the red point between
the two 7-digit displays disappears.
If the display is completely dark, check fuse F1.
Display for active "WSD" wireless safety device
If the "WSD" wireless safety device is active, a red point is displayed on the right digit display.
