8
Finish installation
Fit the cover of the junction end box.
Switch on the voltage.
i
NOTE
Damage due to moisture
Make sure that the screws and cable glands are tightened.
Insert battery
The WSD door-module is powered by a battery. The battery life depends on the safety edge system
(optical, electrical), frequency of use and the size of the door, and is usually more than 1 year.
Replace the batteries during the annual maintenance of the door system.
DANGER
Do not attempt to charge the battery.
Do not short-circuit the battery.
Do not disassemble or deform the battery.
Do not heat the battery. Store the battery in a cool and dry place.
CAUTION
Before inserting the battery, check the contact terminals of the WSD gate door-module.
Only insert the batteries if they are clean and dry and not deformed.
The battery must be depassivated before use.
Tap the battery about 6 times on a hard level
surface.
12
6x
Insert the battery.
LITHIUM
3.6V
