FOOT-END MOUNTING BRACKET AND CROSSTUBE INSTALLATION
FOR OPTIONAL FOOT-END ASSIST DEVICES
(KIT ZA82900; INCLUDES TWO CROSSTUBES, TWO MOUNTING
BRACKETS, AND HARDWARE)
1. Locate the two Crosstubes (#3) in your kit. Align the
outside oblong holes with the appropriate foot deck
holes—fourth and seventh holes from the foot deck
foot end.
2. From the top, insert a
5
/
16
-18 x 1.75" Button Head
Machine Screw (#5) from your kit through each of the
holes in both the deck and the deck tubes.
3. From the bottom, secure the screws to the tubes
using four
5
/
16
-18 Thin Nylock Nuts (#6). Hand
tighten.
4. Locate the two long U-shaped Rail Mounting
Brackets (#4) in your kit. The brackets should be
oriented so that the top hole closest to the edge of
the bracket is furthest away from the foot end of the
bed. With the open end facing downward as shown,
align the top holes with the inside oblong holes on the
underside of the crosstubes.
5. From the top, insert a
5
/
16
-18 x 1.75" Button Head
Machine Screw (#5) from your kit through each of the
holes in both the deck and the deck tubes.
6. From the bottom, secure the screws to the tubes
using four
5
/
16
-18 Thin Nylock Nuts (#6).
7. Tighten all hardware using a
1
/
2
" wrench and
3
/
16
"
hex key.
GF Health Products, Inc. - www.grahamfield.com
Liberty Series Service Manual 999-0822-190G
LIBERTY SERIES
19
For Parts Call Medical Parts Source: 941-342-7725
