Installation Instruction
Manual
28
5.
Pull upper cam
5
off.
6.
Loosen threaded bolt
4
.
7.
Pull the base with spindle
6
out of the housing
7
.
8.
Type ER 52:
-
Complete spindle with respective connecting piece
-
Turn brass by 180°.
9.
Screw the base
6
with a wrench in the actuator.
10.
Screw the spindle
7
with an Allen key into the spindle nut of the actuator (Attention: left
thread).
11.
Place housing on base
6
:
-
Make sure that the electrical connection is in the desired position.
-
Secure threaded bolt
4
.
12.
Put upper cam
5
on the spindle
7
.
13.
Do electrical connections according to chapter 7 „Electrical Connections“.
