Powerdrive product family
31
Inspection of the installed door system
10 Inspection of the installed door system
10.1 Measures to prevent and secure hazardous areas
X
Check protective earth connection to all metal parts that can be touched.
X
Perform a safety analysis (risk analysis).
X
Check the function of safety sensors and movement detectors.
10.2 Assembly check list Powerdrive product family
no.
Test
in
On page
Com-
pleted
1
All cables routed correctly for installation of the Powerdrive?
–
–
2
Track mounted?
3
Angled floor guide mounted?
à
Angled floor guide, floor mounting (option)
à
Angled floor guide wall installation (option)
4
Continuous floor guide mounted (option)?
5
Moving leaf installed?
6
Drive components installed?
7
Tooth belt mounted?
8
Tooth belt locking mechanism (optional) and control unit connected?
9
Safety devices mounted?
10
Switches/push buttons installed and correctly connected?
11
Programme switch installed?
12
Transformer ground fitted?
13
230/115 V connection established?
14
Cover earthing connected?
15
Cover fixing mounted?
16
Safety analysis carried out?
–
–
17
Deviations of the door system checked in accordance with safety analysis? –
–
18
Are all components mounted in accordance with the following instructions: –
–
19
à
Pre-installation instructions for the Powerdrive product family
–
–
20
à
Installation instructions Powerdrive – girder section and side panel
–
–
21
à
Pre-installation instructions profile system leaves and side panel
–
–
22
à
Installation instructions protective leaf for sliding door drives
–
–
23
à
Installation instructions safety leaf
–
–
24
Type plate added to the drive?
Notes:
à
Only relevant for Germany and within the scope of validity of
DIN 18650-1.
à
The type plate may only be attached to the drive if assembly was also
checked for correct completion according to the GEZE specifications
using the check list.
