Powerdrive product family
8
Installation
4.3 Torques
The torques are given at the respective installation step.
4.4 Components and assembly groups
See the ep-drawing for the required installation situation and drive drawings.
5
Installation
WARNING!
Risk of fatal injury due to electric shock!
X
Do not loosen screw-fitted , electrical ground connections.
X
Secure workplace against unauthorised entry.
X
Always work with a second person.
X
Use a stepladder or stepstool with test seal.
X
Keep inside area of track clean.
5.1 Preparations to be made on-site
X
Check the preparations made on site by the customer to ensure proper installation:
à
Type and load capacity of the façade construction or suspending frame
à
Evenness of the installation surface
à
Evenness of the finished floor level
à
Cable plan requirements
5.2 Mounting the track
X
Protect the running surface from damage.
5.2.1 Screw on the track.
View from the side
X
Determine the installation
height of the track (2).
Take unevenness of wall and
floor into account.
X
Align the track horizontally.
X
Mark the fastening drill holes
(1) (upper row of drill holes on
the track).
X
Remove the track.
X
Drill the holes (1) for fixing.
X
Screw the track (2) in place.
X
Install the sealing profiles (3).
X
Press rubber seal into the
draught sealing profiles.
With 1-leaf door systems:
X
Install the wall strips (4).
