Powerdrive product family
20
Installation
5.7 Connecting the tooth belt locking mechanism (optional) and control unit
1
2
1
X
Plug the cable tooth belt locking mechanism (optional) (1) in at the control unit (2).
X
Route the cable to the tooth belt locking mechanism (optional).
5.8 Connecting the transformer ground
The track is not earthed if there is a poor connection between earthing jumper (3) and track.
X
Check whether the setscrews (4) of the earthing jumper (3) penetrate the anodised layer of the track.
X
Connect the earthing cable (2) from the trans-
former to the device flat plug (1).
