Geysers
PERFORMANCE CHARACTERISTICS
GP INSTANT PRIME GEYSER
INNER CONTAINER
Made of heavy gauge S.S. 304L sheets to withstand a bar pressure of 87 PSI.
OUTER BODY
The outer body is made of high quality ABS plastic material, which is rust proof, shock proof
and scratch resistant.
HEATING ELEMENT
ISI approved, mineral filled, copper sheathed, electroplated elements rated at 3 KW are used.
INSULATION
Superior Glasswool Insulation to prevent heat loss
GP STORAGE PRIME GEYSERS (ABS & CRC WATER HEATERS)
INNER CONTAINER
Hydraulically pressure tested at 60N/cm2 (87 PSI) as a standard.
OUTER BODY
ABS - It is made of a scratch free, rust proof and shockproof material.
CRC - Powder coated body made of a heavy gauge CRC sheet and stove enameled for an
elegant look and long life
HEATING ELEMENT
ISI approved, mineral filled, copper sheathed element rated at 2KW are used.
INSULATION
Superior Glasswool Insulation to prevent heat loss
GP GLASSLINE PRIME GEYSER
INNER CONTAINER
Glasslined Enamel Coating to protect from corrosion and incrustation. High pressure water
heaters are pressure tested at 80N/cm
2
(120 PSI approx)
OUTER BODY
ABS/MS Powder Coated Body for scratch free, rust proof and shockproof material.
HEATING ELEMENT
ISI approved, mineral filled, copper sheathed element rated at 2KW are used.
MG ROD
The water heater is fitted with an anode rod for protection against rust and corrosion of the
inner tank.
