7
Communication objects
You can select the following communication objects:
Block X, general:
Parameter
|
Note:
When toggling between operating modes the
"Brightness" and "Times" tabs change.
- Telegrams
For each movement block the "Action at start of movement"
can be set as a function of the operating mode.
Normal operation:
– "Send immediately"
– "Do not send"
Master mode:
– "Send immediately"
– "Send immediately and then cyclically"
– "Do not send"
Slave mode:
– "Send immediately and then cyclically" (is permanent
setting in the background of the application software, is
not displayed in the parameters)
Monitoring mode:
– "Send immediately and then cyclically" (is permanent
setting in the background of the application software, is
not displayed in the parameters)
The behaviour after the "End of movement time" can also be
set as a function of the operating mode.
Normal operation:
– "Send after staircase timer/remaining time has elapsed"
– "Do not send"
Master mode:
– "Send after staircase timer/remaining time has elapsed"
– "Send after staircase timer has elapsed and then
cyclically"
– "Do not send"
Slave mode:
– "Do not send" (is permanent setting in the background of
the application software, is not displayed in the
parameters)
Monitoring mode:
– "Send at end of cycle time when there is movement and
then cyclically" (is permanent setting in the background
of the application software, is not displayed in the
parameters)
Four output objects are available for each of the five
movement blocks and they can be enabled via the
application software. A transmission pause between the
individual output objects can be set for each block.
|
Note:
Five movement blocks and four output objects per
movement detector means that 20 switching/value
objects in all are available.
Function
Object name
Type
Prio
Flags Behaviour
The objects
are only
visible in
"Master
mode"
operating
mode.
Block X
Master trigger
object
1 bit
Low
WC
Receive
Block X
Trigger object
1 bit
Low
WC
Receive
Block X, general
Parameter
Setting
Operating mode
Normal operation
Master mode
Slave mode
Monitoring mode
