Gewiss Chorus GW 10 766, Руководство пользователя

Страница: 22 / 64

PROGRAMMING WITH THE EASY BASE UNIT
22
After creating the required function the actuator’s operating parameters can be set from
the "Application
→
Parameters" menu.
The parameters available, in relation to the function created, are listed in the following
table.
The underlined value is the default value.
Function: timer mode
Parameter: activation time
not active no timing
1 second relay activated for 1 second
2 seconds relay activated for 2 seconds
3 seconds relay activated for 3 seconds
5 seconds relay activated for 5 seconds
10 seconds relay activated for 10 seconds
15 seconds relay activated for 15 seconds
20 seconds relay activated for 20 seconds
30 seconds relay activated for 30 seconds
45 seconds relay activated for 45 seconds
1 minute relay activated for 1 minute
1.25 minutes relay activated for 75 seconds
1.5 minutes relay activated for 1.5 minutes
2 minutes relay activated for 2 minutes
2.5 minutes relay activated for 2.5 minutes
3 minutes relay activated for 3 minutes
5 minutes relay activated for 5 minutes
15 minutes relay activated for 15 minutes
20 minutes relay activated for 20 minutes
30 minutes relay activated for 30 minutes
1 hour relay activated for 1 hour
2 hours relay activated for 2 hours
3 hours relay activated for 3 hours
5 hours relay activated for 5 hours
12 hours relay activated for 12 hours
24 hours relay activated for 24 hours
Configuration parameters (Easy)