Gewiss Chorus Digital Vision, Техническое руководство

Страница: 63 / 104

Chorus Digital Vision - Technical System Manual
61
CONFIGURATION
Wall-mounting entryphone (GW 18 360)
The wall-mounting entryphone is customised via 1 DIP switch (12-way) located inside the base of the entryphone. The table below shows
the functions associated with each switch, and the possible options.
ATTENTION: before changing the position of any switch, make sure that the entryphone is not powered.
DIP SWITCHES
Switch Function Options Description
1 Learning mode
OFF = normal operation
ON = learning mode This allows you to activate the entryphone learning mode.
2
Sets the number of the
relay unit
2 3 module number This sets the number of the relay unit commanded
with the push-buttons. The number corresponds to the
sequence in the project file, when programming with a
PC. With manual programming on the other hand, these
switches must necessarily be set at OFF - OFF.
OFF OFF 1
OFF ON 2
3
ON OFF 3
ON ON 4
4
Sets the command for the
AUX1 button
OFF = activates the electro-lock of
the secondary front door unit
ON = activates the electro-lock of
the relay unit This determines whether the AUX1 command activates
the electro-lock of the secondary front door unit or of the
associated relay unit.
5
Sets the relay of the relay
unit associated with the
AUX2 button
5 6 relay number This determines which relay output of the associated
relay unit is activated with the AUX2 command.
OFF OFF 1
OFF ON 2
6
ON OFF 3
ON ON 4
7
Sets the operation of the
local relay
OFF = relay activated when a call
is received
ON = relay activated with the “Door
opener” button This determines whether the relay is activated automa-
tically when a call is received, or whether it is activated
with the "Door opener" push-button.
8
Confirmation beep when
using the buttons OFF = deactivated
ON = activated Activates or deactivates the "confirm" sound when using
the push-buttons.
9
Relay timing
9 10 11 sec This determines how long - in seconds - the local relay
must remain closed.
OFF OFF OFF 2
OFF OFF ON 5
10
OFF ON OFF 10
OFF ON ON 30
ON OFF OFF 60
11
ON OFF ON 120
ON ON OFF 180
ON ON ON 300
12 Reset entryphone
OFF = normal operation
ON = entryphone reset Restores the factory configuration of the entryphone.
1
ON ON
2 3 4 5 6 7 8 1 2 3 4
1 2 3 4 5 6 7 8 9 10 11 12