![Gewa UP380G Скачать руководство пользователя страница 38](http://html.mh-extra.com/html/gewa/up380g/up380g_user-manual_2218805038.webp)
38
7.2
APPLYING REGISTRATIONS
In order to use one of your saved user settings registrations, proceed as follows:
1. Press the “User Settings“ button.
2. Press the “Bank“ softbutton to select the desired Bank (A, B, C).
3. The 6 sound selection switches represent the 6 slots of each bank now
(Bank A: Piano = A1, EPiano = A2, …). Press a sound selection switch to gain access
to the desired storage space. If you want to choose the Default Setting, press the
Default softbutton instead.
4. Use the “User Settings“ button again to leave the registration mode. The setting remains.
If the pop-up “Empty“ is displayed when selecting a specific slot, you have not saved any
registration to it yet.
NOTE
USER SETTINGS
REGISTRATION OF SETTINGS
7
USER SETTINGS
7.1
REGISTRATION OF SETTINGS
Your digital piano can store settings to up to 3 banks (A, B, C) which contain 6 slots each.
This enables you to keep your favourite user settings readily available on demand. You
can register all sounds with assigned effects, sound combinations (Split, Dual, 4Hand),
metronome settings as well as almost every setting within the Function Menu.
To register a setting, proceed as follows:
1. Press the “User Settings“ button.
2. Press the “Save“ softbutton.
3. Use the “Bank“ softbutton to select one of the banks and the upper/
lower cursor keys to select the final storage space.
4. Press the right cursor key (OK) to register your setting or the left cursor
key (Abort) to cancel.
5. Use the “User Settings“ button again to leave the registration mode.
You can overwrite your registrations as often as desired.
If you have found the ideal setting that satisfies all of your personal preferences, you can
define it as “Default“ so that it is loaded immediately when switching on the digital piano. In
order to do so, proceed as described above in steps 1 and 2. Save the setting as “Default“
by pressing the respective softbutton and confirm your choice with the right cursor key (OK).
Then, select “User“ as the desired start-up setting (-> page 30).
NOTE
TIP
3/4
3
2
1/5