Gewa G9, Руководство пользователя

Страница: 84 / 180

Auto Pan
Pans the sound between the left and the right speaker in 180° out of phase. The volume of both channels (Left and
right) is driven by a sine LFO waveform.
Parameters Range Unit Dry/Wet Description
Modulation Rate
0-20 Hz
Controls the length of the LFO waveform period and
thus the frequency of the alternating effect.
Modulation Depth
0-127
Controls the intensity of the panning effect. Values
range from 0 (equals Mono) to 127 (full alternation
between 63L and 63R values).
Bit Crusher
This effect adds edginess to your sound by reducing the waveform resolution of the signal.
(along the amplitude and the period).
Parameters Range Unit Dry/Wet Description
Bit Resolution
0-16 bit
This parameter pixelates the audio signal and reduces
the resolution of the signal (vertical direction, Bit
Depth). Values: 0 (no reduction), 1 bit up to16 bits
Down Sampling
1-16
Reduces the resolution of the wave period by lowering
the sampling rate. (horizontal direction, quality) Values
are defined as a factor of reduction and range from 1
(no reduction) up to 16 (reduction down to 1/16 of the
original sampling rate).
Brightness
0-100 %
Bit Resolution and Down sampling are prone to in-
creasing the proportion of high frequencies in the
output signal.
Brightness adjusts the frequency of a
Low Pass (High Cut) filter with a transition steepness of
12 dB. Low slider positions correspond to low filter
frequencies and less high frequencies, whereas high
slider positions translate to high filter frequencies and
thus, filter less highs.