NOTE:
During the milk frothing, if there is suddenly a noise
and the steam become weak, please check whether the
water in the water tank is enough. If the water is going to
finished in the water tank, it will make a louder noise.
Please add water in time.
TIPS For How to Continue Frothing:
1: When you have frothed milk about 1-2 times. You can
wait until the steam switch light stop flashing, then
continue to froth milk.
2: When you have frothed milk for more than 3-4 times,
the steam will become weaker and you need to pump the
water into the boiler. Firstly, turn on the knob to " ",wait
for the water coming out from the outlet. The machine
will begin to pump water. Secondly, turn the knob to " "
to stop. Now you can froth milk again from step 3.
Pour the froth milk into the espresso. Enjoy your
Cappuccino.
5.
To avoid blocking the froth nozzle, we suggest to clean the
froth nozzle immediately after finish frothing milk. Press
the steam switch, if there is no steam or just little steam,
check whether the hole of the froth nozzle is blocked. If it
is not cleaned in time, it will produce a bad smell.
Turn the knob to the far side“ ” . steam will come out
from froth nozzle. Clean froth nozzle with cloth, then
operation knob to middle to stop.
1.
2.
NOTE: As The seal ring is designed to prevent from leaking,
once there is too much coffee powder left,the seal ring will be
blocked. If the seal ring is blocked, it will lead to the espresso
leakage or splash when making espresso. For this reason and
for healthier, we suggest you to clean it immediately with hot
water from the brewing function. If it is not cleaned in time, it
will produce a bad smell.
Make sure to tear off the sealing tape from the bottom of
the water tank.
( If it has been torn, please skip this step.)
Before making espresso, make sure the knob is in the
middle “ ” position.As the knob is a functional selection
knob, if it is not in the “ ”, that means you have selected
one of the function, which could not operate the following
steps.
(1) Not to make espresso Immediately after milk frothing.
You should wait until the two switch lights stop flashing
and remains the coffee switch light illuminated, then
continue to make espresso from step 3.
(2) As with NTC precision thermostats, the espresso
extraction temperature is controlled at 197℉, while the
milk frothing temperature is at 212℉.
(3) If the temperature is too high to make espresso,the
steam will be splash from the portafilter and hot water
will drip off. It will result in a small amount of coffee and a
bad taste.
TIPS: CLEAN AND MAINTENANCE
How To Clean The Steam Nozzle
(Please mind the hot water and operate carefully)
How To Clean The Seal Ring
(Please mind the hot water and operate carefully)
