Quick set-up instructions
3
Installation
IMPORTANT:
All work must be undertaken by suitably trained and qualified personnel. Isolate product
from mains at all times when central cover is open. Use the cable supplied for connection to
the mains supply. Use cable junction box for safe connection of the product or if you are
required to extend the cable.
The product should always be mounted in the orientation shown. If the product is to be
mounted from above – the U Bracket should be moved from the bottom of the product to
the top.
1. Mount illuminator to PTZ, column, wall or camera housing. If no optional set up
required (see below) – power can now be connected.
2. Optional: Set-up & Connections (See diagram on Page 5).
Remove back cover of central PSU unit by removing top and bottom screw (captive) and
adjust settings if required.
Isolate product from mains at all times when cover is open.
Please Note:
Once any optional
adjust-ments have been
made, replace the back
cover of the PSU
ensuring the gasket is
facing in the correct
orientation, as shown.
G-Lite
_
I
A_DE_EN_F
R
_D
I
NA
5
b.
pd
f 17
0
2.
05
.2
0
13
08
:32:
04
G-Lite_IA_DE_EN_FR_DINA5c.pdf 17
G-Lite_IA_DE_EN_FR_DINA5c.pdf 17
02.05.2013 08:35:58
02.05.2013 08:35:58
