G-Cam/EWPC-2271
Installation
8
3. PART NAMES
①
Sunshield
Position the sunshield to prevent direct sunshine.
②
Video Out Cable socket
Socket for the video output cable included in the package (CVBS: 1.0Vp-
p / 75Ω BNC)
③
PAL/NTSC button
Pressing the PAL/NTSC button each time changes the mode as follows.
No video output -> PAL-> NTSC
*
* Steady output of video until you change the video output mode by pressing the button.
④
Reset button
Use the button to restart the device or to reset it to Factory Default. Refer
to 6.3. Reboot
and
6.4.
Factory Default
for more details.
⑤
microSD memory card slot
Camera supports up to 32GB. A card with Class 4 and higher is recommended for HD recordings.
⑥
Terminal Connector
Connector for cables of digital input/output and audio input/output.
⑦
Power Adaptor Connector
Use DC12V for the power supply.
⑧
LAN connector
RJ45 LAN connector for 10/100 Base-T Ethernet (PoE supported).
* Models herein and their appearance are subject to change without any prior
notice.
①
⑦
⑥
③
④
⑧
⑤
②
②
Содержание G-Cam/EWPC-2271
