001-14154-33-EN rev. 2
3 of 8
1.2 Adjust the height of the spreader bar when it returns to charger or when it returns to
home position (ECS).
At the activation of the Return to Charge/Return to Home, the spreader bar will rise all the
way up to avoid any obstacles during the run. When the lift is at the charge/home station,
the spreader bar lowers by itself to the adjusted height to be easily accessible.
A) Enter into the User Service Mode and select the second choice (consult section 1).
B) The strap will wind up completely.
C) Once the strap is completely wound up, press the UP and DOWN buttons to position the spreader bar to
the desired height whenever the unit returns back to charge or back to home.
D) To confirm the desired height, press the PROG button.
E) You can now choose a new program selection by pressing on the UP button on the hand control. To
return lift to normal use, turn off the lift and turn it back on.
1.3 Enable / Disable
– Return to Charge or Return to Home (ECS)
1.3.1For unit not equipped with IR option
The automatic direction Return to Home (RTH) function is factory disabled and can be enabled by
the user. It may also be enabled left or right, according to the user’s needs
.
A) Enter into USER SERVICE MODE and select the third choice (consult section 1).
B)
Use hand control LEFT button to select
“ENABLE or DISABLE” SELECTION
.
LIFT MODELS
RTH / RTC SETTING
Model not featuring IR option
1 beep
2 beeps*
3 beeps
4 beeps
DISABLE
DISABLE
ENABLE
LEFT
ENABLE
RIGHT
C) To confirm your selection, press the PROG button.
D) Now you can choose a new program selection by pressing on the UP button on the hand control. To return
to normal use, turn off the lift and turn it back on.
1.3.2
For unit equipped with IR option
The automatic direction Return to Charge (RTC) function is factory enabled and can
be dis
abled by the user. It may also be enabled left or right, according to the user’s needs
.
A) Enter into USER SERVICE MODE and select the third choice (consult section 1).
B)
Use hand control LEFT button to select “ENABLE or DISABLE” SELECTION
.
LIFT MODELS
RTH / RTC SETTING
Model featuring IR option
1 beep*
2 beeps
3 beeps
4 beeps
ENABLE
“AUTO.”
DISABLE
ENABLE
LEFT
ENABLE
RIGHT
* Default setting from factory
C) To confirm your selection, press the PROG button.
D)
Now you can choose a new program selection by pressing on the UP button on the hand control.
To return to normal use, turn off the lift and turn it back on
.
