Control Elements, Putting into Operation
77811011
PhysioMem
®
PM 100 2G
23
NOTE
Even during charging, you can take the device from the charging pad
and use it for a recording.
NOTE
If you put the device on the charging pad while the battery has al-
ready been fully charged to 100 %, the double beep does not sound
and the orange LED is not lit.
Charging the battery after complete discharge takes approx. 3 hours.
A fully charged battery lasts approx. 5 days in typical use (3 ECG
recordings per day).
Press the button (1) to switch on the device. The progress indicator
in the display shows that the device is being powered up (Fig. 9).
Fig. 9.
Progress indicator showing that the device is being powered up
Once the device is ready for use, the display changes to the main
display (Fig. 10).
← Mobile transmission active / inactive
← Number of ECG recordings stored
← Charging state of the battery
Fig. 10.
Main display
