Getac PS236, Руководство пользователя

Страница: 92 / 111

NMEA Log
To start logging, tap Setting

Log

Start . To stop, tap Setting

Log

Stop .
For each logging section, new data is added to the end of the existing data
in the same file. By default, the log file is named ‚GeTACGPSLog‛ and saved
to ‚My Documents‛ folder on your device. To specify a different name and
location for file, tap
Setting

Log

File .
SBAS Settings
SBAS (WAAS, MSAS, ENGOS) provides additional accuracy and reliability for
the GPS devices. Ground stations are necessary to achieve the purpose.
The SBAS feature works where such stations exist. To enable the feature, tap

Settings

System

GPS

Advanced . Tap the checkbox to enable or
disable the SBAS function. A check (

) indicates enabled.
Tap ok when finished. If you change the setting while a GPS program (such
as TacLink) is running, the change takes effect only after you exit the GPS
program and then start it again.
Tap the checkbox to
enable or disable the
function. A check (

)
indicates enabled.