eShark HD-PLC LON EVK
20
HD
-P
LC/
Us
erDo
ce
S
h
ark
_
HD
-P
LC_
LON_
m
an
u
al
_
en
_
V
0
2
0
1
.d
o
cx
Setup the hardware
It is recommended using a power strip with power switch to turn on and off the
whole system easily.
5.1
First steps
Select one device to be the HD-PLC Master.
5.1.1
Easylon HD-PLC Bridge
Connect a power cable to the eShark box. Verify the position of the M/T switch,
it must be set to M. Connect the master HD-PLC device to the PC with an Ether-
net cable. You may use an Ethernet switch.
5.1.2
eShark Box
Connect a power cable to the eShark boxes. Check the position of the M/T
switch. It must be set to terminal.
Now connect all devices to main power. After a short time, the yellow PLC LED
on the master device must start blinking. The green PLC LED on the eShark
boxes will turn on.
PLC status LED
