eShark HD-PLC LON EVK
18
HD
-P
LC/
Us
erDo
ce
S
h
ark
_
HD
-P
LC_
LON_
m
an
u
al
_
en
_
V
0
2
0
1
.d
o
cx
of a LON network. The user interface can be used to have an overview on the
network, if LonMaker is not available. Please refer to the manual of the Easylon
OPC server.
The setup is located in
HDPLC\EasylonOPC
.
If used, the Easylon OPC Server M needs to be connected to one of the MIP0-
MIP3 interfaces. You find a license for the Easylon OPC Server M on the license
sheet, provided with the EVK.
The setup of the Easylon OPC Server M in mandatory to install the environ-
ment for the Easylon XIF Editor.
3.7
EPOS XIF Editor code generator
This is an update of the XIF editor, coming with the previous installed Easylon
OPC Server. The software is located in
HDPLC\XIF2Code
. The exe-file can be
started without any installation. Please copy the content of the directory, together
with the .c.xtf and .h.xtf files to a directory of your favour.
3.8
Easylon Analyzer
The Easylon Analyzer needs to be connected to one of the MIP0-MIP3 inter-
faces. You find a license for the Easylon Analyzer on the license sheet, provided
with the EVK. The setup is located
in HDPLC\EasylonAnalyzer
.
3.9
Gesyline Manager
The Gesyline Manager Setup is in the FTP area for the EVK at
https://ftp.gesytec.de/pub/Gesyline/eShark.
3.10
Echelon IzoT CT
3.10.1
Microsoft Visio 2016
Echelon IzoT CT requires Microsoft Visio 2016 as user interface. If you are us-
ing the trial version of Echelon IzoT CT you need to get Microsoft Visio 2016
from another source and this needs to be installed before running the Echelon
IzoT CT trial setup. A purchased version of Echelon IzoT CT includes Microsoft
Visio 2016.
3.10.2
Echelon IzoT CT
Please run the setup according to Echelon’s installation guidelines.
