GESTRA VKP 41plus Ex, Руководство по установке

Страница: 18 / 36

18
The installation program starts.

Follow the on-screen prompts to complete the
installation.
A "GESTRA" folder is created during installation in
which the program files are stored.
A program icon is shown on the desktop.
Establishing test objects on the computer

To start the TRAPtest program double-click on
the program icon.
For more information on the PC program see the
operating instructions for the PC program.

Specify the test objects as described in the
operating manual for the software program.

Download the test jobs to the data collector as
described on page 18.
Establishing test objects on the data collector
You can also enter test objects directly in the data
collector. After the test you can upload these test
objects to the computer.
In order to do so run and save the test as "Quick
Check". To make it easier to relate the test to the
test object later on the computer, you should note
the reference number of the respective quick
check.
This procedure is more time consuming than using
pre-defined test objects. You should therefore use
the quick check option only in exceptional cases.
We recommend quick checks only in the following
cases:

To add test objects that are not yet defined in
the data base

To repeat tests several times for a more
accurate identification of a faulty trap

Perform the quick check as described on page
26.

Note all necessary data of the test object.
You will find a template in the file "Data
records.doc" under
"Programs/GESTRA/TRAPTtest_VKP" on your
computer.
 After the test touch the "Save" button.
 Write down the indicated storage number.
The test result is stored under the test job "9999".
This test job is not allocated to any company.

To assign the quick check test results to a
company in the data base on the computer
follow the instructions given in the operating
manual for the PC software program.
Transferring data between the data collector
and computer
The TRAPtest program uses the developer
setting "USB debugging" of the data
collector. The developer settings must
therefore remain enabled.
When you transfer data for the first time
the option "USB debugging" is shown.

To enable data transfer, touch the "OK"
button.
To transfer data between the data collector and the
computer, do the following:
 Start the PC program on your computer.

Switch on the data collector.
 Select the TRAPtest program on the data
collector.
 Use the supplied USB cable to connect the data
collector to the computer.
 If the data link between the data collector and
the computer is active, the "Data transfer"
button is enabled.

Touch the "Data transfer" button on the data
collector.
The display of the data collector shows a data
transfer message.

To return to the main menu, touch the "Exit"
button.
Performing tests
 Start the TRAPtest program.
The main menu appears. For more information on
the main menu see page 16.

To start a test touch the "Test Jobs" button .