GESTRA VKP 41plus Ex, Руководство по установке

Страница: 17 / 36

17
 Confirm the security enquiry to exit the TRAPtest
program.
For more detailed information on the functions refer
to the following chapters.
Establishing a Bluetooth connection
To establish a Bluetooth connection for data
transfer between the data collector and the Com
Box ("pairing"), proceed as follows:

Switch on the data collector.
 Make sure that the Bluetooth connection to the
data collector is active.
 Start the TRAPtest program.

Switch on the Com Box.
 Touch the "Menu" icon.

Select the submenu item "Bluetooth".
The submenu "VKPC Pairing" will open up.

To find Bluetooth sources in the signal reception
area touch the "Start Bluetooth Scan" button.
The display shows "Searching VKPC ...." The data
collector is searching for Bluetooth sources in the
signal reception area.
When the search run has stopped the Com Boxes
with their respective device names and serial
numbers will be shown. The device name is
"VKPxyz“. The serial number "xyz" corresponds to
the number indicated on the name plate of the Com
Box.

To pair the data collector with the desired Com
Box touch the corresponding entry.
You can establish only one data connection
between the Com Box and a data collector.

Touch the "Continue" button.
A password dialogue box opens up. The password
for the Com Box is "1234".
 Enter the password as described in the
operating instructions for the data collector.
The two devices are being paired. The display
indicates "Connected VKP" as well as the type and
serial number of the Com Box. The charge of the
Com Box is shown.
Should an error occur during the pairing routine, the
message "Error during pairing" is shown.

In this case repeat the pairing routine.
Installing the program on a PC
To create test objects and to evaluate the tests you
have to install the supplied software on your
computer.
To install the software on a computer the following
system requirements must be met:

Operating system: Microsoft Windows
®
7 SP1
or higher

SQL Server
®
2014 LocalDB

Microsoft .NET Framework 4.0.2 or higher

Microsoft Windows
® Mobile Device Center

4.2 GB free hard disk memory

at least 4 GB RAM
Attention!
Data from older program versions may be
lost when a new version is installed.
 Back up all existing data before
installation.

Back up all data from older program versions
that you do not want to delete.

Close all other applications on your computer.
To install the software on your computer you must
have full administrator rights.

Connect the supplied data carrier to your
computer.
For more information on how to install the PC
program refer to the "ReadMe" file on the data
carrier.
The installation program should start automatically.
If the autostart function has been deactivated, start
the installation program manually. To do so proceed
as follows:

Find the "SETUPW.exe" installation file on the
data carrier.

Double-click on the installation file.