background image

 

 

28 

  

 

Putting the equipment out of 

operation 

Removing harmful substances 

 

DANGER 

If the equipment is used in contaminated 
areas there is a risk of severe injuries or 
death caused by harmful substances in or 
on the equipment. 

 

Only qualified personnel are allowed to 
perform work on contaminated 
equipment. 

 

Always wear the protective clothing 
prescribed for contaminated areas 
when working on the equipment. 

 

Make sure that the equipment is 
completely decontaminated before 
carrying out any service work. 

 

Follow the pertinent instructions for 
handling the hazardous substances in 
question. 

  

Qualified personnel must have extensive experience 
with and a working knowledge of: 

 

pertinent rules and regulations concerning 
handling hazardous substances 

 

special regulations for handling the hazardous 
substances encountered on site 

 

using the required personal protective 
equipment (PPE) and clothing 

  

 

 

Caution 

Environmental damage may be caused by 
poisonous fluid residues. 

 

Before disposing of the equipment 
make sure that it is clean and free of 
fluid residues. 

 

For the disposal of all materials 
observe the pertinent legal regulations 
concerning waste disposal. 

  

 

Remove all residues from the equipment. 

 

For the disposal of all residues observe the 
pertinent legal regulations concerning waste 
disposal. 

  

Removing the equipment 

 

DANGER 

Personnel working on pipes are exposed to 
safety risks and may suffer severe injuries, 
poisoning or even loss of life. 

 

Make sure that no hot or hazardous 
fluid is in the equipment or the pipes. 

 

Make sure that the pipes upstream 
and downstream of the equipment are 
depressurised. 

 

Make sure that the installation is 
switched off and protected against 
unauthorised or unintended activation.  

 

Make sure that the equipment and the 
pipes have cooled down to room 
temperatures. 

 

Wear protective clothing that is 
suitable for the fluid and, if necessary, 
wear protective gear. 

For more information on suitable protective clothing 
and safety gear refer to the safety data sheet of the 
fluid in question. 

Содержание UNA 43





































Отзывы: