9
Meet the requirements for storage also when
transporting the equipment.
Your physical strength and on-site regulations and
conditions determine what weight can be lifted and
if support is required.
Prior to transport seal off connections with
sealing plugs.
Take the equipment out of the transport
packaging.
If you do not have the sealing plugs
supplied with the equipment use
appropriate seal caps to seal off the
connections.
Check the equipment for transport damage.
Contact the manufacturer if you detect any kind
of shipping damage.
For short distances (only a few metres) you can
transport the equipment unpacked.
When supplied by the factory, the connections may
be sealed off with sealing plugs.
When transporting the equipment over larger
distances use the original packaging.
Remove sealing plugs before mounting the
equipment.
If you do not have the original packaging use a
box that protects the equipment adequately
against corrosion and physical damage.
Keep the sealing plugs and the packing for
further use.
DANGER
Personnel working on pipes are exposed to
safety risks and may suffer severe injuries,
poisoning or even loss of life.
Make sure that no hot or hazardous
fluid is in the equipment or the pipes.
Make sure that the pipes upstream
and downstream of the equipment are
depressurised.
Make sure that the installation is
switched off and protected against
unauthorised or unintended activation.
Make sure that the equipment and the
pipes have cooled down to room
temperatures.
Wear protective clothing that is
suitable for the fluid and, if necessary,
wear protective gear.
For a short period of time the equipment
may be transported even if the
temperature is below 0 °C, provided that
the equipment is completely empty and
dry.
Mounting and connecting the
equipment
Preparing installation
DANGER
Risk of bruises if the equipment or
component parts fall down.
Use suitable lifting gear when moving
or lifting the equipment and/or
component parts.
Make sure that the equipment cannot
topple over.
Make sure that nobody is standing
below the lifted equipment.
For more information on suitable protective clothing
and safety gear refer to the safety data sheet of the
fluid in question.
Drain pipes until they are empty.
Lightweight equipment may be transported and
mounted without using any lifting gear.
Switch the installation off and protect it against
unauthorised or unintended re-activation.
To lift equipment the weight of which exceeds
approx. 25 kg, you need the help of a second
person or suitable lifting gear.
