GESTRA NRS 1-41, Оригинальная инструкция по установке

Страница: 20 / 36

20
Electrical Connection
– continued –
CAN bus wiring diagram
Fig. 12
RES 2
CEP
NRS, NRR, LRR,
TRS, URB 1
URB 2 NRG, LRG, TRV
EF, URZ
NRG, LRG, TRV
EF, URZ
RES 1
Attention
n
Wire equipment in series. Startype wiring is not permitted!
n
Link screens of control cables such that electrical continuity is ensured and connect
them once to the central earthing point (CEP). If equipotential bonding currents are
to be expected, for instance in outdoor installations, make sure that the screen is
separated from the central earthing point (CEP).
n
To protect the switching contacts fuse circuit with T 2.5 A or according to TRD
regulations (1.0 A for 72 h operation).
n
If two or more system components are connected in a CAN bus system, provide the
first and the last device with a terminating resistor of 120 Ω, Fig. 10, Fig. 11
n
Note that in a CAN bus network only one highwater level limiting system may be
used.
n
Do not interrupt the CAN bus network during operation with one or more system
components!
If the CAN bus network is interrupted the safety circuit will be opened.
If the control unit is to be replaced detach terminal strip
0
, Fig. 3
Before taking the CAN bus line from the terminal strip, make sure that all connected
system components are out of service.