GESTRA LRGS 15-1, Руководство по установке

Страница: 4 / 28

4
Important Notes
Safety note
Danger
When loosening the conductivity switch hot water or steam may escape. This presents
the risk of severe scalding.
Before removing the conductivity switch make sure that the boiler pressure is 0 bar.
The conductivity switch is hot during operation. This presents the risk of severe burns to
hands and arms. Before mounting, servicing or removing the equipment make sure that
it has cooled down to room temperatures.
The terminal strips of the conductivity switch LRGS 15-1 are live during operation.
This presents the danger of electric shock.
Cut off power supply
to the equipment before mounting, removing or connecting the
terminal strips.
The equipment must only be installed by and commissioned by qualified and competent staff.
Retrofitting and maintenance work must only be performed by qualified staff who – through adequate
training – have achieved a recognised level of competence.
Usage for the intended purpose
The conductivity switch LRGS 15-1 must only be used for measuring the electrical conductivity in
liquids.
ATEX (Atmosphère Explosible)
According to the European Directive 2014/34/EU the equipment must
not
be used in potentially explo-
sive areas.
Note on the Declaration of Conformity / Declaration by the Manufacturer
For details on the conformity of our equipment according to the European Directives see our Declaration
of Conformity or our Declaration of Manufacturer.
The current Declaration of Conformity / Declaration of Manufacturer are available in the Internet under
www.gestra.de/documents or can be requested from us.
LV (Low Voltage) Directive and EMC (Electromagnetic Compatibility)
The equipment meets the requirements of the Low Voltage Directive 2014/35/EU and the
EMC Directive 2014/30/EU.