2
3
Introduction
The Gesswein Power Hand 2X BZX Belt Sander is manufactured to the highest
standards available to provide many years of trouble-free service. Backed by a
limited warranty that covers wear parts for 90 days and overall balance of parts
for six months.
This DC electrically driven handpiece is designed to be used with Gesswein
Power Hand 2X Single, Standard, Dual, Jewelers’ Micromotor, Power Carver II
and Bright-Cutting Controllers. These controllers convert the Alternating Current
(AC) power supply to a variable Direct Current (DC) by means of an I.C. “transis-
torized” automatically controlled circuit.
Specifications
Speed Range (RPM)
Dual or Single Controller*
0-15,000
Standard Controller
1,500-15,000
Belt Speed (m/sec.)
Dual or Single Controller*
0-12
Standard Controller
3-12
Max. Output
60W/sec.
Max. Stoppage Torque
0.098 N-m**
Net Wt. (without power cord)
16 oz.
*Or Standard Controller with variable-speed foot rheostat
**Foot-pounds/Newton-meters
Fig. 1
1.
Accessories
Included Accessories
A. Six Abrasive Belts
(one each: 6 and 8mm wide in 120, 180 and 320 grits)
B. One Straight Belt Arm (for 6 and 8mm belts)
C. One 45°-Angle Belt Arm (for 6 and 8mm belts)
D. One Belt Arm Pulley
E. One Belt Arm Support Pad
F. Two Screws (M2.6)
Optional Accessories
A. Small Straight Belt Arm (#510-0494): for 4mm belts
B. Handpiece Extension Cord (#510-1120): adds 6', or almost 2m, to the 1.7m
handpiece cord
C. Handpiece Cradle Rest (#510-1120): provides safe holding place for hand-
piece when not in use
D.Variable-Speed Foot Rheostat (#510-3100)
E. On/Off Foot Switch (#510-3105)
