Gesswein BZX 510-2130, Инструкция по эксплуатации

Страница: 10 / 16

7
10
5.
Precautions
A.
Before operating your Belt Sander, be sure the desired belt is properly
secured around both pulleys.
B. Do not attempt to change belts while the handpiece is operating.
C. During use, avoid pushing too hard on the work tool or exceeding torque
capacity of Belt Sander motor.
D.
Always disconnect the Belt Sander from your Gesswein Controller by the
plug, not the cord.
E. Do not use oil or lubricants of any kind. Doing so will cause damage to the
handpiece bearings.
F.
Do not subject power cord on handpiece to sharp bending or rough treatment.
Such treatment could cause the cord wires to be broken.
G. Under normal circumstances, the Belt Sander will not overheat. If, howev-
er, your Belt Sander does overheat, please contact the Gesswein Repair
Department.
Part# Part# Item# Description
BZX-100-1 BS1-100-1 5100494 Belt Straight Arm Complete (4mm)
BZX-100-2 BS1-100-2
5100496
Belt Straight Arm Complete (7mm)
BZX-102-1 BS1-130
8960183
Belt Arm Pulley for 4mm Arm
BZX-102-2 BS1-140 8960184 Belt Arm Pulley for 7mm Arm
BZX-103-1 BS1-272 8960185 Belt Arm Support Pad for 4mm Arm
BZX-103-2 BS1-273
8960186
Belt Arm Support Pad for 7mm Arm
BZX-104 BS1-276 8960188 Dustproof Cushion
BZX-105 S-5 8960189 O-Ring
BS33-200
8960196
BELT HOLDER BODY COMPLETE
BZX-200 BS33-200A
8960197
Belt Holder Body
BZX-201 BS1-263 8960200 Spring Base
BZX-202 BS1-264
8960201
Screw Lid
BZX-203 KB-099
8960202
Coil Spring
BZX-204 BS1-277 8960203 Protection Cover
BZX-300 BS33-100
8960204
MOTOR COMPLETE
BZX-301 BS3-260
8960205
Driving Pulley Complete
BZX-302 BS3-265 8960206 Driving Pulley
BZX-303 BS3-266 8960207 Driving Rubber Ring
BZX-400 ETW-2
8960156
E-Ring
BZX-500 BS33-204A 8960225 Handgrip
BZX-501 BS33-113A 8960226 Handgrip Retaining Nut
BZX-502 YSR31-101
8960228
Handgrip Locking Screw
BZX Belt Sander Parts List
When ordering spare parts, always specify part# (or item# if applicable) and
description.