Gesswein BZX 510-2130, Инструкция по эксплуатации

Страница: 12 / 16

5 12
3.
General Use
The Gesswein Belt Sander is designed to use sanding belts of 4, 6, and 8mm widths.
Select a 6mm or 8mm wide belt for the Straight Belt Arm supplied with the Belt
Sander. Hold the Belt Sander in your hand with your index finger on the Release
Knob, and pull back the spring-loaded arm.
Place the selected belt over the Drive Pulley and the Belt Arm Pulley (see fig. 3).
Release your index finger from the Release Knob, and allow the spring-loaded
arm to extend fully for proper belt tension.
Fig. 3
Part# Item# Description
BZX-100-3 5100495 Belt 45° Arm Complete (7mm)
BZX-102-2
8960184
Belt Arm Pulley for 7mm Arm
BZX-103-3 8960187 Belt Arm Support Pad
BZX-104 8960188 Dustproof Cushion
BZX-105
8960189
O-Ring
BZX-106 8960191 Pan Head Screw
BZX-107
8960193
O-Ring
BZX-108
8960194
Guide Pulley Cover
BZX-109 8960195 Countersunk Head Screw
BZX-304
8960192
Guide Pulley Complete
BZX Belt Sander 45°-Angle Arm Parts List
When ordering spare parts, always specify part# (or item# if applicable) and
description.