Gesswein 510-2245, Инструкция по эксплуатации

Страница: 4 / 12

Tighten
Loosen
Top Cover
4
3.
Stroke Adjustment
The New SZX Profiler has an adjustable
stroke of 0-1.6mm, measured at the Tool
Holder. However, the stroke will be greater
at the tool end. To adjust stroke, first
remove the top cover by firmly grasping
the knurled ring (see fig. 2) and unscrew-
ing in a counterclockwise direction.
Completely remove the top cover from the
handpiece motor. Next, loosen the Hex
Socket Set Screw (see fig. 3) located on
the side of the main eccentric shaft using
the Allen Wrench provided. Now line up
the mark on the Knurled Adjusting Ring
with the stroke setting marked in millime-
ters on the side of the main shaft. Finally,
tighten the Hex Socket Set Screw, and
firmly secure the handpiece Top Cover to
the motor by screwing in a clockwise direc-
tion.
4.
Tool Attachment
Loosen the Tool-Securing Set Screw
located on the Swing Arm (Tool Holder)
using the Tool Pin provided. Place the tool
into the Tool Holder and fasten securely
(see fig. 4).
Fig. 2
Fig. 3
Loosen
Tighten
Tool
Fig. 4
9
0
4 .
.0
8
Tighten
Loosen Hexagon
Key Wrench