Gerni Ultimate 130.2 F, Руководство пользователя

Страница: 4 / 19

4
may adversely affect the
safety of the appliance.

Disconnect from electrical
power supply before carrying
out user maintenance.

To ensure the appliance
safety only use original spare
parts from the manufacturer
or approved by the manufac-
turer.

WARNING! High pressure
hoses, fi ttings and couplings
are important for the safety
of the appliance. Only use
hoses, fi ttings and couplings
recommended by the manu-
facturer.

Do not use the appliance
if a supply cord or impor-
tant parts of appliance are
damaged, e.g. safety device ,
high pressure hose and trig-
ger gun.

The appliance is intended for
cleaning outdoors.

Remove the plug from the
socket outlet during cleaning
or maintenance and when
replacing parts or converting
the machine to another func-
tion.

Appropriate ear protection
must be used.

Never use the machine in
an environment where there
could be a danger of explo-
sion. If any doubt arises,
please contact the local
authorities.

It is not allowed to clean
asbestos- containing surfaces
with high pressure.

WARNING! Risk of explosion
- Do not spray fl ammable
liquids.

Always switch off the mains
disconnecting switch when
leaving the machine unat-
tended.

This high pressure washer
must not be used at tempera-
tures below 0°C.

Never let any persons stay
under the product when
stored on the wall.
WARNING!
Inadequate extension cables
can be dangerous.
If an exten-
sion cord is used, it shall be
suitable for outdoor use, and
the connection has to be kept
dry and off the ground. It is
recommended that this is ac-
complished by means of a ca-
ble reel which keeps the socket
at least 60 mm above the
ground. Cables on reels should
always be completely unwound
to prevent the cable from over-
heating.
Extension cables should com-
ply with the below-mentioned
requirements for length and
cable dimensions.
1.0 mm² max. 12.5 m
1.5 mm² max. 20 m
2.5 mm² max. 30 m

If the electric cable is
damaged, it must be re-
placed by the manufacturer
or his service agent or simi-
larly qualifi ed person in order
to avoid a hazard.
Mains power connection
The following should be ob-
served when connecting the
high pressure washer to the
electric installation:

Only connect the machine to
an installation with earth con-
nection.

The electric installation shall
be made by a certifi ed elec-
trician and comply with IEC
60364-1.

It is strongly recommended
that the electric supply to this
machine should include a re-
sidual current device (GFCI).
Water connection

Connection to the public
mains according to regula-
tions.

Inlet hose can be connected
to the water mains with a
max. inlet pressure of 10 bar.
IMPORTANT! Only use wa-
ter without any impurities.
If
there is a risk of silt, sand or
sediment in the inlet water (i.e.
from your own well), an addi-
tional fi lter should be mounted.
Safety devices
Locking device on spray handle
(6a)
(see illustration at the end
of this manual) :
The spray handle features a
locking device. When the button
is activated, the spray handle
cannot be ope rated.
Thermal sensor:
A thermal sensor protects the
motor against overloading. The
machine will restart after a few
minutes when the thermal sen-
sor has cooled.
Pressure safety device
An integrated hydraulic safety
valve protects the system from
excessive pressure.