12
6.2.3 Checking the oil level
1. Check whether the oil level
is in the middle of the oil
inspection glass. Top up with
oil if necessary (see section
8.3 for type of oil).
6.2.4 Changing the pump/
gear oil
1. Before changing the oil,
allow the pressure washer to
become warm.
2. Unscrew the plugs at the top
and the bottom of the pump.
3. Allow the oil to drain into a
suitable container (min. 1 l
capacity) and dispose of oil in
compliance with regulations.
4. Mount plug at the bottom of
the pump.
5. Fill pump with fresh oil (see
8.3 for oil type and quantity).
6. Check the oil level (see
6.2.3).
