bEFORE OPERATING THE AIR PURIFIER:
1. Carefully remove your air purifier from box and bag.
2. Select a firm, level and flat location for the air purifier.
* For proper air flow, locate the unit at least 1 foot from any wall or furniture.
* Make sure none of the grills are blocked.
3. Plug the power cord into a 120V AC outlet.
IMPORTANT
:
When moving the air purifier, always lift unit by the carrying handle located on back.
1. Turn the air purifier ON by rotating POWER KNOB clockwise.
2. Upon turning the air purifier ON, the power indicator will be lit and the unit will be in
LOW mode ( ).
3. Rotate the POWER KNOB clockwise further to set the air purifier to MEDIUM mode ( ).
4. Continue to rotate the POWER KNOB clockwise to set the air purifier to HIGH mode ( ).
5. To activate the UV-C Bulb, press the UV button. Press the button again to turn OFF the
UV-C Bulb.
6. To turn the unit OFF, rotate the POWER KNOB counter-clockwise to OFF mode (
•
).
E-8
E-9
INSTALLING & REMOVING UV-C bULb
2. After removing
the Rear Cover
from the unit,
remove the
Combination Filter.
1. Remove the Rear
Cover of the unit
by pushing Lock &
Release Button.
3. After removing the
Combination Filter,
use a Philips head
screwdriver to
remove four (4)
screws and detach
the UV-C Metal
Shield.
4. The UV-C Bulb is removed by carefully grasping the bulb with a clean cloth or tissue and
pulling the bulb straight out of the unit. (Fig. 4).
5. The UV-C Bulb is reinstalled by sliding it, horizontally, back into the slots at the top of the unit. .
bulb is NOT visible
until the UV-C METAL
SHIELd has been
removed.
FIG. 4
TWIST bULb
1/4 TURN TO
REMOVE.
REPLACEMENT bULb: Lb5000
AVAILAbLE AT 866.603.5900 OR
WWW.GUARdIANTECHNOLOGIES.COM
CLEANING & MAINTAINING
THE COMbINATION FILTER
The air purifier should be cleaned at least once every month and the outer Pre-/
Charcoal Filter attached to the HEPA Filter should be cleaned every month. More frequent
cleaning may be required depending on environmental conditions.
PRE-/CHARCOAL FILTER
Clean with the brush attachment of your vacuum cleaner. This will remove lint and dirt.
TRUE HEPA FILTER
Remove the Combination Filter from the back of unit.
Remove the Pre-/Charcoal Filter to expose the HEPA Filter.
When the HEPA Filter turns from white to grey or black it should be replaced with
a new one. If the HEPA Filter is still white, it does NOT need to be replaced.
AIR PURIFIER
Use a clean, dry, soft cloth to wipe the external surface of the unit.
IMPORTANT
:
Do NOT try to wash and re-use the Combination Filter. Please contact
Customer Service at
1.866.603.5900
or visit us at
www.guardiantechnologies.com
to
purchase a replacement filter.
Replacement filter: FILTER C (FLT5000 or FLT5111)
NOTE
:
The Combination Filter is one filter system. The multiple layers include: the
Pre-/Charcoal Filter and the True HEPA Filter.
